where can i use it?
Woodwash can be used on wood decks, wood fences, wood railings, wood siding, log homes, cedar shakes, and any weatherd wood surfaces.
how much do i need?
50 to 400 sq. ft/gallon depending on surface and amount of dilution with water.
how do i install or apply it?
Preparation
Ensurethat all project surfaces are relatively dry. Apply only if wood temperature is above 50F.Pretect adjecent surfaces from contact with Woodwash; bare metal, paint and wood stain can be damaged. Pre-wet vegetation before spraying Woodwash. Exposure to concentrate may burn foliage but rinsing residue will not harm plants or roots.
Application
Dilute Woodwash with up to one part tap water. Use full strength on failed wood stains or heavily grayed wood.
Apply with a pump-style garden sprayer or nylon brush. Evenly and saturate surface. On vertical surfaces apply Woodwash from the bottom to the top.
Agitate lightly where required - use stiff brush or floor broom to help remove residue. Work in the direction of the grain to minimize "grain raising" on wood surface.
Rinse wood in direction of grain with water; using a garden hose or a 500-1200 PSI power washer. A power washer will eliminate the need for agitation.
Previous: Health